Xiaomi Mi 11 Lite EDL Mode Test Point PINOUT

Find EDL MODE FOR Xiaomi Mi 11 Lite

• Power off the device if possible.
• Open back cover of dead Xiaomi Mi 11 Lite. [You may do Google to tear down Xiaomi Mi 11 Lite at home]

[Be careful at the time of removing the back cover of the device and make sure you are not going to damage any hardware of the device]

1. To begin with, download and install the Qualcomm HS USB QD Loader Drivers.
2. This driver is needed so that your PC is able to recognize the connected device in EDL Mode.
3. Next up, disconnect the battery from your device. Then plug one end of the USB cable into the device.
4. Now connect the other end of the cable to the computer when short-circuiting the red-marked area.
5. If done correctly, your device will now boot to the EDL Mode and you may then start the flashing process via the Xiaomi Tool.
6. To verify the same, open Device Manager and expand the Ports or Other Devices section.
7. If your device is listed as Qualcomm-HS-USB-QDLoader-9008, then it has been successfully booted to EDL.
8. Other Ways to Enter EDL Mode on Xiaomi Mi 11 Lite
9. Follow the instruction below carefully to boot your device into EDL Mode (aka Emergency Download Mode)
10. By Shorting Hardware Test Points
11. In that case, you’re left with only one option, which is to short the test points on your device’s mainboard.
12. Power off the device if possible.
13. Open the back cover of the phone
14. Short the 2 test points on your device’s mainboard
15. And then plug the USB into your PC
16. Once your Qualcomm Android device has entered EDL mode, you can connect it to the PC and use tools like Xiaomi Download tool to flash firmware files to unbrick or restore stock ROM.
17. Using Adb Mode
18. First, install ADB & Fastboot driver on PC and then turn on USB debugging on your phone.
19. Now connect your device with PC using USB Driver.
20. Then open a command window in PC and paste following commands and hit enter.
21. If any pop up appears on the phone screen then allow the ADB access.
22. Fastboot mode
23. Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
24. Boot your device into the bootloader
25. Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
26. now enter the command. \fastboot oem edl